 |
| Quantity: | |
|---|---|
CJPZ64
CBB
Technical parameters：
1). As a special 6-axis four-station polishing robot, this machine has six degrees of freedom, four stations working simultaneously, flexible and efficient,
is widely used to polish products of sanitary, gating, auto parts, etc.
2). Adopt the advanced motion control technology to its control system, ensuring the stable performance and accurate control.
3). Programming method: teaching programming, which uses manual mode to simulate manual polishing and record it. Afterwards, the machine will polish
automatically in accordance with the recorded track.
4). Auto compensation of polishing wheel: the system can detect when the torsion gets weakened after polishing cloth wheels being worn, and then compensate
automatically from all directions.
5). Linear speed compensation: the system will automatically increase rotating speed to make up for linear speed m when outer diameter of cloth wheel gets smaller.
6). Wax-spraying setting: can set time and frequency of wax-spraying according to characteristics of your products.
7). Full-digital controlled, and programs can be memorized for use at anytime.
8). It is easy to set functions and parameters through touch panel. Also the touch panel can show defect codes, facilitating inspection.
NO. | Item | Parameter |
1 | Machine Size | 5300*3400*3000 |
2 | Power | 32kw |
3 | Rated voltage | 380V |
4 | Max. size of buffing wheel | 600mm |
5 | Min. size of buffing wheel | 400mm |
6 | X-axis travel | 900mm |
7 | Y-axis travel | 825mm |
8 | Z-axis travel | 700mm |
9 | U-axis travel | ±90° |
10 | V-axis travel | ±360°Forward and reverse |
11 | W-axis travel | ±360°Forward and reverse |
Company Introduction:
Fujian Nanan Delin Machinery Manufacturing Co.,ltd
Delin Company Located in sanitary home Nanan,is the earliest professional casting equipment manufacturer in the southern parts of china.
With the area of 50000m2,350 workers including 65 middle&highclass professional technicians.
Main Products:Automatic molding machine,low pressure die casting machine,gravity casting machine,furnace,core shooting machine,mix sand machine,abrator,etc...
Widely used in plumbing,sanitaryware,car spares,valves.iron cast lines,etc
It provides a series of service,including technical conseling,mould designing,live training for staff,etc
Q1. Where is your factory located ? How can I visit it ?
A : Our factory is located in Quanzhou city,Fujian province,China. You can fly to Jinjiang or Xiamen air port, we will pick you up.
Q2. Are you produce polishing machine's specific parameters according to the samples?
A: Yes, we produce the machine you want by your samples or technical drawings. Usually one machine have different molds and fixtures like metal polishing machine,die casting machine.
Q3. What is your sample service?
A: We can supply the sample testing which client want to produce if we have ready machine in stock, but the customers have to pay the sample shipping cost.
Q4. What is your MOQ of your machine?
A: Normally our MOQ is 1 set.
Q5. Do you test all your machine before delivery?
A: Yes, we have 100% test before delivery.
Technical parameters：
1). As a special 6-axis four-station polishing robot, this machine has six degrees of freedom, four stations working simultaneously, flexible and efficient,
is widely used to polish products of sanitary, gating, auto parts, etc.
2). Adopt the advanced motion control technology to its control system, ensuring the stable performance and accurate control.
3). Programming method: teaching programming, which uses manual mode to simulate manual polishing and record it. Afterwards, the machine will polish
automatically in accordance with the recorded track.
4). Auto compensation of polishing wheel: the system can detect when the torsion gets weakened after polishing cloth wheels being worn, and then compensate
automatically from all directions.
5). Linear speed compensation: the system will automatically increase rotating speed to make up for linear speed m when outer diameter of cloth wheel gets smaller.
6). Wax-spraying setting: can set time and frequency of wax-spraying according to characteristics of your products.
7). Full-digital controlled, and programs can be memorized for use at anytime.
8). It is easy to set functions and parameters through touch panel. Also the touch panel can show defect codes, facilitating inspection.
NO. | Item | Parameter |
1 | Machine Size | 5300*3400*3000 |
2 | Power | 32kw |
3 | Rated voltage | 380V |
4 | Max. size of buffing wheel | 600mm |
5 | Min. size of buffing wheel | 400mm |
6 | X-axis travel | 900mm |
7 | Y-axis travel | 825mm |
8 | Z-axis travel | 700mm |
9 | U-axis travel | ±90° |
10 | V-axis travel | ±360°Forward and reverse |
11 | W-axis travel | ±360°Forward and reverse |
Company Introduction:
Fujian Nanan Delin Machinery Manufacturing Co.,ltd
Delin Company Located in sanitary home Nanan,is the earliest professional casting equipment manufacturer in the southern parts of china.
With the area of 50000m2,350 workers including 65 middle&highclass professional technicians.
Main Products:Automatic molding machine,low pressure die casting machine,gravity casting machine,furnace,core shooting machine,mix sand machine,abrator,etc...
Widely used in plumbing,sanitaryware,car spares,valves.iron cast lines,etc
It provides a series of service,including technical conseling,mould designing,live training for staff,etc
Q1. Where is your factory located ? How can I visit it ?
A : Our factory is located in Quanzhou city,Fujian province,China. You can fly to Jinjiang or Xiamen air port, we will pick you up.
Q2. Are you produce polishing machine's specific parameters according to the samples?
A: Yes, we produce the machine you want by your samples or technical drawings. Usually one machine have different molds and fixtures like metal polishing machine,die casting machine.
Q3. What is your sample service?
A: We can supply the sample testing which client want to produce if we have ready machine in stock, but the customers have to pay the sample shipping cost.
Q4. What is your MOQ of your machine?
A: Normally our MOQ is 1 set.
Q5. Do you test all your machine before delivery?
A: Yes, we have 100% test before delivery.
